|
How to use WiRES-X ALL JA CQ ROOM
ALL JA CQ ROOM is communicate by CQ calling on a main theme. You can make
not only CQ calling but also appointing calling. There are many Japanese
stations , but all stations in the world are welcomed. You can use this
room by neighboring WiRES-X node station which exist all over the world.
When connected to #20510 as for one QSO, around 10-15 minutes. A large
number (from 60 to 170) of nodes are connected, so we make mutual concessions
together. If you wish a long QSO, you should be changed to the connection
in another room again. The empty room serch system is active. Please check
WIRES node and room search site.
How to make a "CQ calling"
Start "CQ calling" after having received for 3 minutes not to
QRM. You can make CQ calling less than three times. You had better send
a call sign clearly and briefly. Long CQ calling and CQ running fire are
disliked. Good Calling Example, "CQ This is (Your callsign less than 3times) via WIRES (node number or your QTH) , go ahead!". There is the atmosphere that seems to be wide area repeater system. Because
many nodes go in and out frequently into the room, a timing is very important.
There are several operater good at English. Challenge "CQ calling
in English" on the 20510 room. If no responce, you can make CQ callings
less than 3times within 3min.
To simprex Node owner and node managers
CTCSS or DCS squelch is mandatory for simplex nodes by FM mode. If you
connect to room of 20510, Node stations had better work in low or middle
power and must use CTCSS or DCS squelch not to caused QRM. If your node
caused QRM or QRN into the room, it will be disconnected or muted or refused
from 20510 room by the management team member. Cross-links to other linking
programs (EchoLink, IRLP,etc.) or even other WiRES-X or WIRES-II rooms
are prohibited. If your node is capable of cross linking to something
else, please disable that capability before connecting.
About Repeater Linking node
In 20510 room, Repeater IDs or controller messages are not allowed at all.
This requirement is very important. If your node is linked to a repeater,it
may not connect to this room. But repeater node that is direct wireing
to repeater system is no probrem.
ALL JA CQ ROOM management team
E-Mail 0510@cqwires.com
|
